Test item 测试名称:
The ignitability of bedcovers and pillows by smouldering and flaming ignition sources
被罩, 枕头的闷烧及火焰燃烧
Test info 测试内容:
1) Section 2
Pillows and continental quilts tested with smouldering and flaming ignition sources
Smouldering | 0 Cigarette |
Flaming | 1 Butane gas flame |
2 Butane gas flame | |
3 Butane gas flame | |
4 Pine wood crib | |
5 Pine wood crib | |
6 Pine wood crib | |
7 Pine wood crib |
Sample required: (4 pieces for each ignition source) | ||
1) the test specimen shall be representative of the components and make-up of the finished item. | ||
2) for pillows, the test specimen shall be a full size item. | ||
3) for continental quilts, the test specimen shall be of minimum size 650 x 650 x nominal thickness of the finished item. the intended quilting, channeling and edge finishing of the proposed item shall be included in the test specimen. |
2) Section 3
Individual bedcovers tested with smouldering and flaming ignition sources
Smouldering | 0 Cigarette |
Flaming | 1 Butane gas flame |
2 Butane gas flame | |
3 Butane gas flame | |
4 Pine wood crib | |
5 Pine wood crib | |
6 Pine wood crib | |
7 Pine wood crib |
Sample required: 4 pieces for each ignition source | ||
1) the test specimen shall be representative of the components and make-up of the finished item. | ||
2) the size of the test specimens shall be as follows: | ||
a) for cigarette ignition source 0: 450 x 1350mm minimum to allow for folding three times. | ||
b) for flaming ignition sources 1 to 7: 650 x 650mm minimum to allow for an overhang of 150mm. |
3) Section 4
Composite of known bedcovers and pillows tested with smouldering and flaming ignition sources
Smouldering | 0 Cigarette |
Flaming | 1 Butane gas flame |
2 Butane gas flame | |
3 Butane gas flame | |
4 Pine wood crib | |
5 Pine wood crib | |
6 Pine wood crib | |
7 Pine wood crib |
Sample required: | ||
1) the test specimens shall be representative of the components and make-up of the finished assembly of bedcovers and pillows and of the order on which the bedcovers and pillows are laid on a mattress. | ||
2) the test specimens shall be rectangular in shape and of minimum size 650x650mm to allow for overhang of the test specimen. The pillow used in the composite shall be a minimum of half-scale size. |
Lead time 测试周期: 常规 Regular service 5-7working days